What to do with your pool before you go on a holiday

Swimming Pools can be a lot of fun, but they also require work. You need to clean them, check their chemistry, and make sure that they’re not going to turn green while you’re away on vacation. Here are some tips for making sure your pool is safe and healthy while you’re gone so you don’t have to worry about it at all during your trip.

Check the water level.

Before you head out, check the water level of your pool.

You should do this before every trip and during long weekends, too. In addition to making sure that the water is safe for swimming, do also take a look at cleaning your filter, it can also help prevent damage to your pump or filter system if there is a leak in an underground pipe, which can cause expensive repairs later on.

Check the water level

Test the water chemistry.

Before you leave, test the pool water chemistry. This will give you a baseline for when it comes time to test again. You can test for pH and alkalinity with a kit from most major pool supply stores; if you don’t know how to use one yet, ask your local pool store or someone else who knows their way around pools. SmartPools provides these kits standard with all pool deliveries.

To make sure your chlorine levels are safe while you’re gone:

  • Test daily with a chlorine tester—this is an inexpensive device that will help ensure your family will be able to swim safely after returning from vacation.
Test the water chemistry

Shock the water with chlorine.

Before you leave, give your pool shock treatment with chlorine. This will kill any algae and bacteria that have built up in the water, so it will be safe for use once you return from your holiday. You can pick up a bottle of shock treatment at your local pool store or hardware store. Be sure to use one that is safe for your type of pool because different types require different concentrations of chemicals, and it’s important to follow all instructions carefully when mixing solutions!

When you’re ready to shock your water (usually in the spring), check the pH level first: if it’s high (above 7) then consider adding some acid before adding any chlorine. Also, make sure that there are no leaves or debris floating around—this could cause cloudiness as well as damage equipment such as pumps & filtration systems if left unchecked over time.

Shock the water with chlorine

Ensure your chlorinator is functioning.

To ensure your pool is safe to swim in, you should check that:

  • The chlorinator is functioning and turned on. If it is not working or turned off, chlorine will not be added to the water and you should fix this as soon as possible.
  • Your chlorinator does not have any leaks or overflows. If there are any leaks or overflows in your pool equipment, make sure they are fixed immediately so that there is no damage to other parts of the pool system. Also, check where the pipes are connected to ensure they are secure and do not leak!
  • The filter is not clogged with debris from algae etc., which could cause problems if left unchecked for long periods (i.e., weeks).

Conduct a safety check.

Once you’ve decided on your holiday destination, the next thing to do is conduct a safety check of the pool.

  • Check that all fences around the pool are secure (if you have one).
  • Check that all lights in and around the pool area are working (if you have them).
  • Check that your cover is secure over your swimming pool (if you have one).
  • Switch off your pump and make sure it’s not leaking any water into the surrounding areas of your backyard. You’ll want to make sure this happens before leaving so there’s no chance of any flooding while you’re away from home.

The last thing to do before going on holiday is to make sure everything else at home is running smoothly too!

Conduct a safety check

Assign a friend or supplier to maintain your pool while you’re gone.

The best way to make sure your pool is in good shape while you’re away is to assign someone else the responsibility of maintaining it. If you have a friend or family member that’s responsible and trustworthy, this may be an option for you. If not, then consider hiring a professional company to keep tabs on things while you’re gone.

The maintenance professional should have access to all of the pool equipment so they can test water chemistry levels daily, shock as necessary, clean filters and pumps as needed (if applicable), and maintain other aspects of your system that require regular monitoring like lighting or heating units (if applicable).

maintain your pool

A few precautions and organizing will ensure your pool is still in great condition at home when you return from vacation.

Here are a few things to get in order before you leave.

  • Test the water chemistry and shock it with chlorine.
  • Ensure the chlorinators are working properly, and conduct a safety check of your equipment.
  • Make sure someone has your contact information who can be responsible for maintaining your pool while you’re away, in case there are any issues that need immediate attention.
Swimming pool


To sum up, you’re going on holiday and want to make sure that your pool is in good condition when you return. You just have to take some precautions before leaving by following the above precautions and steps. Do also take the time to conduct a safety check around the pool area to make sure there isn’t anything dangerous nearby (such as broken glass bottles), and ask someone reliable like your supplier or friend who lives close by to regularly check up on things like skimmer baskets being emptied every week so nothing else gets into them besides leaves/debris from outside sources.

Once all that is taken into consideration, you can be sure you are leaving your pool in a safe condition for your house and your neighbors.

Last but in no manner the least, one of the most important things to take care of is to have a wonderful holiday!

Everything you need to know about Fiberglass pool

What is a Fiberglass pool and how is it made?

A fiberglass pool is one of the most popular options for homeowners who want a pool in their backyard. Fiberglass pools are durable, long-lasting, and don’t require much maintenance. They’re also affordable, which means you get the best of both worlds: a great pool that you’ll enjoy for years to come, but won’t break your budget.

Fiberglass pool

A fiberglass pool is a fantastically durable, beautiful addition to any backyard. But what exactly is a fiberglass pool?

A fiberglass pool consists of two layers: the pool shell, which is made of fiberglass and resin, and the liner, which protects from the sun, contains filtration systems and acts as a barrier between the water and the interior surface of the shell. The pool shell is then coated with multiple layers of paint to protect it from UV rays and fading over time.

Fiberglass pools are made of 100% solid, non-porous material that won’t rust or corrode, and they can last for decades without the need for repairs or replacement parts.

They’re a great investment for your home. Not only are they low maintenance, but they’re made of a material that’s virtually indestructible and resistant to rust, mold, and mildew. They can be installed in just 1-2 days and can be used all year round, with little to no additional work apart from regular maintenance.

The Manufacturing Process

Fiberglass pools are made from a combination of resin and fiberglass. The manufacturing process is similar to that of concrete or vinyl pools, except that resin is used instead of cement and water.

Fiberglass pool

Fiberglass pools are made in the following steps –

  1. The Pattern
  2. The Mold
  3. The Gel Coat
  4. Vinyl Ester Resin Layer
  5. Fiberglass: Chopped Strand Mat – 1st Coat
  6. Fiberglass: Chopped Strand Mat – 2nd Coat
  7. Woven Roving Fiberglass Layer
  8. Fiberglass: Chopped Strand Mat – 3rd Coat
  9. Honeycomb Core
  10. Fiberglass: Chopped Strand Mat – 4th Coat
  11. Fiberglass: Chopped Strand Mat – 5th Coat
  1. The Pattern

This process begins with the production of the pattern – the original shape of the pool shell. It is made of wood, fiberglass, putty, and primer.

Fiberglass pool

It is not a pool, but a replica of the pool. From this, the mold is then created. The mold is built inside the pattern and then removed. Once the pattern is complete, liquid sealants and release agents are applied to the model so that the finished mold can be removed. The production of the pattern takes about 1-2 months.

2. The Mold

The mold is the second step in designing a new fiberglass pool.

Fiberglass pool

The mold is usually a contrasting color and is made of fiberglass with a steel frame inside. Once the mold is removed from the pattern, it is turned over and the surface is prepared similarly to the pattern so that the pool shell to be built on top of it can be released.

The molds are usually on wheels to facilitate mobility during the manufacturing process. The contrasting color of the mold stands out well against the general blue gelcoat of the pool. This ensures that the gel coat is well covered. The contrasting colors help identify any missing spots or areas.

A steel frame supports the entire underside of the mold. The fabrication of the pattern and mold accounts for 95% of the work in developing a new fiberglass pool.

Building the mold usually takes 3-4 weeks.

3. The Gel Coat

Fiberglass pools are made from the inside out! The Gelcoat is the color you have chosen for your pool. The Gelcoat is a colored resin that is applied to the mold with a spray gun. This Gelcoat is applied in three separate coats to achieve a strong gel finish (up to 30 mils). If this step is not done properly, the gel coat may be too thin, causing bubbles to form on the surface of your pool. On the other hand, if the layer is too thick, the first layer of your pool’s surface may crack.

Fiberglass pool

Most fiberglass manufacturers use polymerization to ensure durability. In simple terms, joining two or more of these components by a crosslinking process to achieve strength and durability). They also use other equipment to ensure proper humidity and air quality.

4. Vinyl Ester Resin Layer

Fiberglass pool

After the Gelcoat has cured, the next step is to spray on the vinyl ester resin barrier coating (water barrier). The Gelcoat is semi-permeable, meaning that certain water molecules can pass through the outer layer of the Gelcoat. If the underlying layer is polyester, a reaction can occur that causes blistering or corrosion. For this reason, a layer of the vinyl ester is placed under the Gelcoat. Ensure your builder uses a manufacturer that incorporates this layer into their fiberglass.

5. Fiberglass: Chopped Strand Mat – 1st Coat

Chopped Strand Mat (CSM) is a random fiber mat that has the same strength in all directions and is used in a variety of hand laminate and open mold applications. In the manufacture of chopped fiber mats, continuous fibers are cut into short lengths of 1.5 to 3 inches and the cut fibers are randomly distributed across a moving belt to form a “web” of random fiber mats. A binder is applied to hold the fibers together, and the mat is cut and rolled.

Fiberglass pool

Because of their random fiber orientation, chopped strand mats are easily conformed to complex shapes when wetted with polyester or vinyl ester resins. After the layer of chopped fiberglass is applied, it is rolled using rollers to avoid air bubbles. This layer must then be cured.

6. Fiberglass: Chopped Strand Mat – 2nd Coat

Fiberglass pool

A second layer of the chopped strand fiberglass is applied after the first fiberglass layer is cured. This will add an additional layer of strength and durability to the first layer. Once the second layer is in place, it is similar to the first layer, rolled to prevent air bubbles and then left to cure.

7. Woven Roving Fiberglass Layer

Fiberglass pool

Apply a layer of woven roving layer of fiberglass. Some manufacturers replace this step with an additional layer of chopped fiberglass. It is important to make sure that the layer is thick exactly where it needs to be thick (only in certain places like corners and where the pool wall meets the pool floor). If the fiberglass is too thin in certain places, it will create “thin spots” that can cause cracks in the Gelcoat. For this reason, a layer of woven roving is applied in this step so that this layer is uniform and free of uneven areas.

8. Fiberglass: Chopped Strand Mat – 3rd Coat

Fiberglass pool

The third layer of chopped fiberglass is applied. After application, it is rolled to prevent air bubbles and then left to cure. This adds another layer of strength and durability to the first and second layers.

9. Honeycomb Core

Fiberglass pool

Vertical strips of honeycomb core are inserted along the fiberglass walls of the pool. They are installed to provide structural integrity to the fiberglass pool walls by adding strength to the fiberglass fabric itself. Without this step, the fiberglass fabric is more flexible and susceptible to hydrostatic pressure.

10. Fiberglass: Chopped Strand Mat – 4th Coat & 5th Coat


The fourth & final (fifth) layers of Chopped strand fiberglass mat are applied at this point and then rolled to avoid bubble formations to complete the formation of the pool shell. These final layers much like the previous layers further add to the strength of the structure.

From what is seen above, the manufacturing process of a fiberglass pool structure is rather complex, hence as simple as it looks, like a tub, it isn’t quite like it.

So, when you are in the market to figure out which pool to choose, which structure is most dependable and most durable and strong, you would be remiss to not give fiberglass pools a thorough consideration.


After all, you and your family deserve only the best!

How do you fix spots, stains, and blisters in fiberglass pools?

We all know the problem of pool stains. Fiberglass pools are generally low maintenance, but eventually, something will get into your pool that doesn’t belong there. Whether it’s a bag of charcoal you forgot or grass clippings from your neighbor’s lawn, unwanted debris can cause black spots and stains in your pool. Luckily, these problems aren’t hard to fix! Here’s how you can remove them:

Fiberglass pools are, generally speaking, low-maintenance.

Fiberglass pool 14

They’re easy to maintain and clean. It’s also easier to repair them if there’s a problem; in most cases, you can even do it yourself. But there’s a catch: fiberglass pools are more prone to discoloration and damage than other pools.

However, all pool owners experience issues with their pools from time to time.

Fiberglass pools are low maintenance and easy to care for, but they aren’t perfect. Occasionally, you’ll find yourself scratching your head when you notice a problem with your fiberglass pool. Here are some things that can go wrong:

  • Black spots on the surface of the water
  • Stains on the bottom and sides of the pool
  • Blistering or bubbling of paint

And when you have a blemish or stain on the surface of your fiberglass pool, it can be frustrating not knowing what caused it or how to remove it.

But don’t worry, we’re here to help! We’ve compiled a list of the most common stain culprits and show you how to get rid of them for good:

  • Soiling caused by debris (e.g., leaves, sand) can be removed with a leaf rake or leaf vacuum cleaner and then brushed with an anti-stain gel.
  • Black spots are caused by mold stains that appear during the winter months when no chlorine protects the surface from mold growth; scrubbing with bleach kills any remaining mold spores so they don’t return the next year.!

Here are a few common issues and ways to fix them.

In the world of fiberglass pools, nothing is more common than black spots. Black spots can occur for a variety of reasons, including:

  • An above-average concentration of sunlight on the surface of the basin (especially in southern climates)
  • Surface dirt that has accumulated on the pool water or around jets/filters/electrical equipment and has not been removed by vacuuming or skimming. If this happens often enough, it can cause these areas to heat up and displace dyes into other areas of your pool. This is especially true if you do not use a weekly shock treatment (chlorine).

Black Spots: These can be caused by anything from the high iron content in your water to have left a bag of charcoal in the pool overnight.

Fiberglass pool 15

The easiest way to remove these stains is with a pumice stone (for softer stains) or an orbital sander (for harder stains). If your fiberglass pool has been stained by black algae, you should start with the pumice stone. Scrub the stain until it’s gone, then rinse your pool thoroughly. If there are still some stubborn stains left, use an orbital sander with 120-grit sandpaper instead of 220-grit sandpaper – that way you won’t scratch the fiberglass walls too much while you’re trying to remove those pesky bubbles.!

Stains: Stains are usually caused by various elements entering the pool’s water like grass clippings, leaves, and dirt.

Fiberglass pool 16

If a stain is caused by the high iron content in your water, you can easily remove it with a simple pool cleaner like WaterCo’s Trident Vacuum Cleaner. If you’re not sure what caused the stain and want to be sure it won’t come back, you need to test your water for various metals and minerals.

If you have hard water spots or stains on your fiberglass swimming pool’s sides, it could be due to several factors including:

  • leaving a bag of charcoal in the pool overnight
  • not scrubbing algae off of steps regularly (or at all)

In some cases, they may even be caused by bacteria. If removed in time, they’re usually easily removed with a stain remover.

If the stain is still fresh and hasn’t had time to bond with the surface of your pool, you may be able to remove it with a chlorine-free bleach. You can get these at your local pool supply store.

Make sure the products you use are safe for fiberglass surfaces before you use them. Some chemicals can damage fiberglass. Follow the instructions on the container carefully – it’s important to get the timing right.!

Blistering and bubbling: Both blistering and bubbling are signs that there’s something wrong with your pool’s gel coat.

Fiberglass pool 17

Blistering, which is more common than bubbling, looks like small bubbles or blisters on the surface of the pool. Bubbling, which is less common than blistering but can be even more damaging to your fiberglass pool, causes larger holes in the gel coat.

It’s not always clear what causes these problems on the walls or deck of a fiberglass pool, but it could be related to improper installation or cleaning techniques (or both). To find out if you have a problem with your fiberglass coating, look for patches of discoloration that differ from their surroundings – if so, they may be areas where the coating has been completely removed and replaced with fresh resin.

Indoor pools may have blistering if humidity levels aren’t sufficiently controlled during the construction process.

If you’ve ever seen a fiberglass pool and thought it looked like a giant bubble, you’ve your finger on the pulse of these things. Bubbling is caused by not controlling the humidity during construction. Indoor pools can have this problem if the humidity isn’t adequately controlled during construction, but outdoor pools don’t have this problem unless they’re located in an area where rainwater frequently pours over them.



If your fiberglass pool is cracking, blistered, and bubbling like a bubble bath on steroids, there is no need to worry. It simply means that the gel coat needs to be repaired by replacing it with new layers of resin-soaked fiberglass fabric over the damaged area.

Overall, the regular maintenance of your fiberglass swimming pool structures is of considerable import if you are to enjoy a problem-free time with your loved ones in your new or already installed fiberglass swimming structure.

What is a concrete pool? How are they built?

Concrete pools are a great option for those who want a long-lasting, durable pool. They are also customizable in terms of shape, size, and depth, which means you can get the pool that fits your needs. But how exactly are concrete pools built? And what can you expect in terms of cost? This article will give you all the need-to-know information about concrete pools!

Concrete Structure

Concrete Structure

A concrete pool is usually built using reinforced concrete, which is a type of concrete that contains steel rebar or other types of reinforcement. Concrete pools can be built in any shape or size, and they are often customized to the needs of the customer.

Concrete pools are built by first excavating the area where the pool will be built. The excavation is then followed by the installation of the steel reinforcement, which is typically done by welding. The excavation is then lined with a waterproofing material and reinforcing steel is added. After the reinforcement is in place, concrete is poured into the excavation and allowed to cure.

Once the concrete has cured, it is then finished with a plaster or tile surface. The finishing process can vary depending on the desired look of the pool. Plaster surfaces are typically smooth, while tile surfaces can be textured or patterned. Once the finishing is settled, the pool is filled with water and is ready to use.

The cost of a concrete pool will vary depending on the size and complexity of the project. In general, concrete pools cost more than above-ground pools or fiberglass pools. However, they also have a longer lifespan and require less maintenance over time.


concrete pool cost

How much does a concrete pool cost? This is perhaps the most frequently asked question when it comes to concrete pools. Unfortunately, there is no easy answer. The cost of a concrete pool can vary widely, depending on several factors. Some of the things that will affect the cost of your pool include the size and shape of the pool, the type of finish you choose, and any special features or customization that you might want. In general, however, you can expect to pay anywhere from RM 75,000 to RM 110,000 for a basic concrete pool.

What to Expect

When most people think about concrete pools, they envision a smooth, stylized pool that is stunning. And while this is true, it’s not the only type of concrete pool out there. Concrete pools can be built in any shape or size you want and can even mimic the look of other types of pools if that’s what you’re going for.

Pros and Cons

When it comes to concrete pools, there are both pros and cons that you need to be aware of. Here are some of the key points to keep in mind:

Concrete pools are extremely durable and can last for many years, With proper care, your concrete pool can last for decades. Many people who have concrete pools end up passing them down to their children or grandchildren.
They are also relatively low-maintenance, especially compared to other types of pools.
Concrete pools are highly customizable. You can choose the shape, size, and depth of your pool, as well as additional features like waterfalls or fountains. If you can dream it, chances are you can create it with a concrete pool.

They also offer a variety of finishes and treatments that can enhance their look.

Concrete pools can be expensive to install, especially if you have a complex design in mind. The initial cost of a concrete pool is usually higher than other types of pools. However, you need to keep in mind that a concrete pool will last much longer than other types of pools, so you may end up saving money in the long run.

They also require more chemicals than other types of pools to maintain the proper pH balance.
If not properly cared for, concrete pools can develop cracks and other structural problems.

Overall, a decision to install a pool, let alone a concrete one lies entirely on you, the user. If you want a quick installation with less hassle and a durable tank, perhaps a fiberglass pool can be your choice of product. If you want aesthetic design and longer-lasting structures, then a concrete pool is the right fit for you.

    • Your Name (required)

      Your Email (required)

      Your Message

      • Your Name (required)

        Your Email (required)

        Your Message

        • Your Name (required)

          Your Email (required)

          Your Message

          • Your Name (required)

            Your Email (required)

            Your Message